skip to Main Content

MODULAR DESIGN & INSTALLATION PROCESS

Opritech’s project team has experienced staff that design, install and commission every aspect of our Modular O.R. From design work-flows, standards, medical equipment, mechanical services to clinical requirements.
We will assist you at every stage.

GENERAL PLANNING

Over-viewing the big picture, studying the functional relationships and general department work-flows.

Ensuring clean/dirty flow paths are maintained and there is efficient transport of patients, consumables and equipment.

Well organised work-flows are important in maintaining compliance.

The department planning also assists us in designing the required mechanical services, cable ways, air ducts and support structures.

  • Department Layout Designs
  • Functional Relationship Planning
  • Work-flows and Planning
  • Clean/Dirty Path Conflict Resolution
  • Equipment & Mechanical Services
  • Collaborative Approach.

ROOM PLANNING

Room planning is another critical phase of the design process. Here we assist you with in-room work-flows and locating services such as, lights, pendants, medical devices and controls strategically to give optimal outcomes.

Opritech utilises 3D CAD programs to enable a virtual tour of your completed O.R or workspace.

  • Clinical Requirements Study
  • 3D Room Planning
  • Equipment and Services Positioning
  • Engineering and Manufacture Plans
  • Expert Advise
  • Compliance with standards.

MANUFACTURE DRAWINGS

Manufacture drawings – produced for all aspects such as, walls, ceilings, services and equipment, to enable you to picture exactly how your completed project will look.

These in-turn become shop drawings which drive CNC cutters, folders and welders to produce the modular assemblies.

  • 3D CAD Component Drawings
  • Service Connection Planning
  • Detailed Project Planning
  • Interface with engineers, architects and sub-trades.

INSTALLATION

Our on-site installation program varies from project to project to suit the unique aspects presented by each job.

Essentially the installation process starts with a detailed mark-out, installation of structural steelwork, and ceiling mounted services.

The Modular sub-structure is installed and in-wall services, cables, gas pipes and integration systems are put in place.

The glass walls and ceiling are completed and final service connection and commissioning takes place.

After a clean, the rooms are handed over and training for clinical and biomedical staff proceeds.

Design and installation staff use templates and check lists to ensure that all relevant structure and services are installed and commissioned to specification and standard.

Opritech uses electronic systems to track all aspects of the project and retains test reports and on-going service records in this system.

GENERAL OPERATING ROOM

The general operating room configuration has an anaesthesia pendant at the head of the room and a centre mount boom with surgical carrier and dual LED surgical lights. The carrier has full coverage of the surgical field (shown by the 3.5m circle).

This design is unique to Opritech. Enjoy complete access to either side of the patient by orienting the carrier around the table and patient, not the reverse. There are no hoses or cords across the floor and no clutter from trolley mounted equipment.

Request more information on our Pendant Systems.

The general operating theatre package includes:

  • 6m x 6m Modular O.R with glass walls, LED room lighting and lighting controls, and 1.8m automatic sliding door
  • 4x ceiling air diffusers and corner return air grills
  • 1x anaesthesia pendant with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x centre mount surgical pendant with 3x shelves, 10x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • Dual Skytron Stellar XL LED Surgical Lights – 160,000 lux
  • 1x SkyVac smoke evacuation system
  • 1x 42” in-wall PAC’s computer and monitor
  • 1x EZ slide 3502 general slide top operating table.

This package can be customised to meet your specific needs.

ORTHOPAEDIC OPERATING ROOM

The orthopaedic operating room configuration has an anaesthesia pendant at the head of the room and a centre mount boom with surgical carrier, monitor arm, and dual LED surgical lights. The carrier has full coverage of the surgical field (shown by the 3.5m circle).

The larger sized theatre provides ample C-Arm access and provision for multiple set up trolleys and extra clinical staff required for orthopaedic surgery. It also has an in-wall PAC computer and large 42” viewing monitor.

The orthopaedic operating theatre package includes:

  • 7.2m x 7.2m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Laminar air flow ceiling and 4x corner return air grills
  • 1x anaesthesia pendant with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x centre mount surgical pendant with 3x shelves, 10x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • Centre mount monitor arm with 26” monitor
  • Dual Skytron Aurora LED Surgical Lights – 160,000 lux
  • 1x Skyvac smoke evacuation system
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x ultra-slide 3602 modular slide top operating table
  • Optional digital integration.

This package can be customised to meet your specific needs.

TRAUMA OPERATING ROOM

The trauma operating room uses two centre mount booms. This room can also be used for orthopaedic procedures where two monitors on separate arms are required.
At the head of the O.R is the centre mount hub with anaesthesia pendant, monitor arm, and LED surgical light.

At the foot of the table is a second centre mount hub with the surgical carrier, second monitor arm, and second LED surgical light. The surgical carrier has coverage from the patient’s left shoulder, down the left side, around the foot, and back up the patient’s right shoulder.

The monitors can be placed independently of each other in the surgeon’s ideal location.

The trauma operating theatre package includes:

  • 7.2m x 7.2m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Laminar air flow ceiling and 4x corner return air grills
  • 1x centre mount pendant with
  • Anaesthesia pendant 10x Power, 4x RJ45 data2x O2, 1x MA4, 2x VAC, 1x AGSS
  • LED Aurora 4 surgical light
  • Monitor arm and 26’’ medical grade monitor
  • 1x centre mount surgical pendant with
  • Surgical carrier, 3x shelves, 10x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • LED Aurora 4 surgical light
  • Monitor arm and 26” medical grade monitor
  • 1x carrier mounted Skyvac smoke evacuation system
  • 1x S-Cape 24” in-wall PAC computer with 42” in-wall monitor
  • 1x ultra-slide 3602 modular slide top operating table
  • Optional digital integration

This package can be customised to meet your specific needs.

CARDIAC OPERATING ROOMS

CARDIAC ROOM

The cardiac operating room features a third LED surgical light. Two monitors are mounted on their own arms so they can be positioned independently.

At the head of the table is an anaesthesia pendant and at the foot is a surgical carrier.

The surgical carrier has coverage from the patient’s left shoulder, down the left side, around the foot, and back up the patient’s right shoulder.

Only two centre mount pendants are needed for this design, eliminating air space conflicts between arms.

The orthopaedic operating theatre package includes:

  • 7.2m x 7.2m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Laminar air flow ceiling and 4x corner return air grills
  • 1x anaesthesia pendant with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x centre mount surgical pendant with 3x shelves, 10x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • Centre mount monitor arm with 26” monitor
  • Dual Skytron Aurora LED Surgical Lights – 160,000 lux
  • 1x Skyvac smoke evacuation system
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x ultra-slide 3602 modular slide top operating table
  • Optional digital integration.

This package can be customised to meet your specific needs.

CARDIAC ROOM WITH PERFUSION

In this O.R a tandem mount pendant services the perfusion unit as an addition to the equipment in the base Cardiac Theatre. This is all achieved with three centre mount boom sets.

When perfusion is not in use, these boom sets are pushed back to the wall, keeping the surgical area clear.

The orthopaedic operating theatre package includes:

  • 7.2m x 7.2m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Laminar air flow ceiling and 4x corner return air grills
  • 1x anaesthesia pendant with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x centre mount surgical pendant with 3x shelves, 10x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • Centre mount monitor arm with 26” monitor
  • Dual Skytron Aurora LED Surgical Lights – 160,000 lux
  • 1x Skyvac smoke evacuation system
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x ultra-slide 3602 modular slide top operating table
  • Optional digital integration.

This package can be customised to meet your specific needs.

ENDOSCOPY OPERATING ROOMS

Our centre mount surgical pendant offers excellent flexibility and efficiency in the endoscopy theatre. Endoscopy O.Rs can be set up in a variety of ways, the following are common designs.

Each department and endoscopy O.R is custom-designed for your needs. We will learn which equipment can be carrier-mounted to prepare a design that reduces clutter from surplus trolleys.

We offer a unique camera trolley that functions in the theatre the same way a carrier mounted system functions (due to the quick de-coupling system at pendant level) and can be speedily moved from one room to another.
Monitors are critical in endoscopy theaters.

We can design an efficient theatre setup factoring in the number and locations of your monitors and the needs of your surgeons.

When we prepare a design, we also consider general anaesthesia rooms, with options for pendants and columns that suit smaller spaces.

ENDOSCOPY operating room WITH DUAL CARRIERS AND ANAESTHESIA PENDANT

The Skyboom Dock-it Cart enables quick transition of camera equipment between theaters while retaining functionality.

The endoscopy theatre with dual carriers and anaesthesia pendant package includes:

  • 5.6m x 5.6m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Optional RGB lighting panels to change ambient light colour for viewing monitors
  • 4x terminal air diffusers and 4x corner return air grills
  • 1x anaesthesia pendant with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x tandem centre mount surgical pendant with 2x carriers with 3x shelves, 16x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • 2x monitor arms with 26” monitor mounted on surgical carriers
  • 1x Skyvac smoke evacuation system
  • 1x LED procedure light
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x select endoscopy patient trolley
  • Optional centre mounted exam light

This package can be customised to meet your specific needs.

ENDOSCOPY operating room WITH ANAESTHESIA PENDANT

A centre mount surgical pendant with monitor means this carrier has 360° coverage of the surgical field. An optional LED procedure light is available. The anaesthesia pendant is located at the head of the room.

The endoscopy theatre with anaesthesia pendant package includes:

  • 5.6m x 5.6m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Optional RGB lighting panels to change ambient light colour for viewing monitors
  • 4x terminal air diffusers and 4x corner return air grills
  • 1x anaesthesia pendant with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x centre mount surgical pendant with 3x Shelves, 10x Power, 4x RJ45 Data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • Centre mounted monitor arm with 26” monitor
  • 1x Skyvac smoke evacuation system
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x select endoscopy patient trolley
  • Optional centre mounted exam light

This package can be customised to meet your specific needs.

Endoscopy Theatre with Anaesthesia Column

The Skyboom Dock-it Cart enables quick transition of camera equipment between theaters while retaining functionality.

The endoscopy theatre with anaesthesia column package includes:

  • 5.6m x 5.6m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • Optional RGB lighting panels to change ambient light colour for viewing monitors
  • 4x terminal air diffusers and 4x corner return air grills
  • 1x anaesthesia column with 10x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x centre mount surgical pendant with 3x shelves, 10x power, 4x RJ45 data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • 1x centre mounted monitor arm with 26” monitor
  • 1x Skyvac smoke evacuation system
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x select endoscopy patient trolley
  • Optional centre mounted exam light

This package can be customised to meet your specific needs.

OPHTHALMIC OPERATING ROOM

The ophthalmic operating room can feature a ceiling mounted microscope, if installed. The microscope takes the primary position and a UB pendant is then typically mounted to the side of the table, positioned over the anaesthetic machine. A dim-able LED procedure light is installed over the table or trolley.

As eye procedures tend to be short, patients are normally admitted and recovered on the same ophthalmic eye trolley, so several spare trolleys are useful to encourage rapid turn-around time between procedures.

The ophthalmic operating theatre package includes:

  • 5.6m x 5.6m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • 4x terminal air diffusers and 4x corner return air grills
  • 1x anaesthesia UB pendant with 6x power, 4x RJ45 data,
    2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x LED procedure light
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x select ophthalmic patient trolley

This package can be customised to meet your specific needs.

MINOR PROCEDURE ROOM

The minor procedure operating room is used for plastics, ENT, endoscopy, and other minor surgeries. A centre mount carrier and LED light provide complete coverage of the surgical field and an anaesthesia pendant or column is positioned at the head of the room.

The Minor Procedure Theatre Package Includes:

  • 5.6m x 5.6m Modular O.R with glass walls, LED room lighting, lighting controls and 1.8m automatic sliding door
  • 4x terminal air diffusers and 4x corner return air grills
  • 1x anaesthesia pendant with 6x power, 4x RJ45 data, 2x O2, 1x MA4, 2x VAC, 1x AGSS
  • 1x tandem centre mount surgical pendant with 3x Shelves, 10x Power, 4x RJ45 Data, 2x O2, 1x MA4, 1x SA7, 2x VAC
  • 1x LED stellar XL surgical light
  • 1x 24” in-wall PAC computer with 42” in-wall monitor
  • 1x Essentia 1602 operating table

This package can be customised to meet your specific needs.

HYBRID OPERATING ROOMS

The operating room of the future – where interventional and surgical environments meet – is a space called the hybrid theatre. Clinicians increasingly require more versatile environments that enable them to conduct both open and complex minimally invasive procedures.

We have teamed up with Skytron to create this adaptable solution to save time and offer flexibility to clinicians performing these types of procedures. Our partners in this process include Siemens, Phillips, GE Healthcare, Toshiba and Shimadzu.

The hybrid operating room design delivers optimal efficiency and clinical flexibility. It provides for the use of advanced surgical equipment and diagnostic tools capable of transforming the theatre for cardiovascular, vascular, neurosurgery or orthopaedics procedures.

Our range of pendants and lights are specially adapted for this design.

HYBRID O.R - PHILLIPS FLEX MOVE

B: Surgical Light
C: Surgical Lights
D: Monitor / Equipment Boom
E: Monitor / Equipment Boom
F: Lead Shield
G: Anesthesia Boom / Light

HYBRID O.R - SIEMENS ARTIS ZEEGO

A: Anesthesia / Perfusion
B: Led Shield
C: Large Display / Light
D: Equipment Boom
E: Equipment Boom

HYBRID O.R - GE HEALTHCARE DISCOVERY

A: Anesthesia / Light
B: Perfusion / Light
C: Equipment Boom / Flatscreen/ Light
D: Flat Screen / Light

HYBRID O.R – TOSHIBA

A: Anesthesia / Service Pendant
B: Monitor / Shield
C: Monitor / Light / Shield
D: Anaesthesia Pendant

Back To Top